Synthetic Oil for Air Tools 500 ml
Synthetic Oil for Air Tools 500 ml
Description
The majority of air tool breakages are caused by inadequate lubrication. Pneumatic tools require continuous, daily lubrication using a lubricator installed as close as possible to the tool.
Non-detergent synthetic composition, based on polyalphaolefins for optimal performance for pneumatic tools and cylinders.
Very low pour point (-55°C) and stable viscosity to lubricate and protect air tools exposed to very cold temperatures.
Contains additives to prevent rust for extended air tool life.
Minimizes gum and polish to achieve optimal power and speed from air tools.
Daily use ensures longer tool life.
The 500ml size has a cap with a pouring spout.
Technical Specifications
- Product TypeSynthetic Oils
- Lubricant TypeSynthetic
- Compatible EquipmentAir Tools
- Pour Point (°C)-55
- Size (ml)500
- Viscosity (ISO)32
- Viscosity (SAE)15
Documents
Warranty
GL: 1 Month Limited Warranty
The limited replacement warranty (GL) means that the product, or parts of the product, may be replaced by a new product and/or parts or equivalent. The warranty covers any manufacturing or material defect. The warranty applies upon first use of a new product. The warranty does not cover installation and/or removal costs incurred by the customer nor shipping costs.
Failure to comply with the technical specifications, failure to follow the guidelines in the installation guide and/or the technical sheet, inappropriate or excessive tightening, misuse and/or abuse, failure to comply with the maintenance guidelines, normal wear, contamination and/or corrosion, neglect/accident, unauthorized repair attempt and/or disassembly, alteration of the product, assembly with incompatible products.
A product with a limited warranty of 1-month (GL) that is new, but unusable upon first use, may be replaced following the inspection conducted by TOPRING.
Disclaimer
Please note that while we make every effort to accurately represent our products on our website, slight variations in design and appearance may occur due to factors such as manufacturing processes and materials used.