Stainless Steel Pressure Relief Valve 1/4 (M) NPT 50 PSI
Stainless Steel Pressure Relief Valve 1/4 (M) NPT 50 PSI
Description
Made from stainless steel, it is ideal for use in corrosive environments.
Pressure is preset at the factory to a pressure setting that cannot be changed, in which case the safety valve releases the system's air into the atmosphere.
Superior, corrosion-resistant quality.
Optimum air exhaust rate.
High air flow rate.
Canadian registration number: OG-06391.2
Valve manufactured in accordance with the safety valve standards of the National Board of Boiler and Pressure Vessel Inspectors, section ASME VIII.
Technical Specifications
- Product TypeSafety Valves
- With ExhaustYes
- Maximum Regulated Pressure (PSI)50
- Inlet Connection TypeThreaded
- Inlet Connection SubtypeNPT
- Inlet Nominal Size (Imperial)1/4 in
- Inlet Connection GenderMale
- With CRNYes
- Compatible FluidsAir
- Mechanism or Internal Moving Parts MaterialStainless Steel
Documents
There are no documents available.
Warranty
G1: 1 Year Warranty
The replacement warranty (G) means that the product, or parts of the product, may be replaced by a new product and/or parts or equivalent. The warranty covers any manufacturing or material defect. The warranty does not cover installation and/or removal costs incurred by the customer nor shipping costs.
Failure to comply with the technical specifications, failure to follow the guidelines in the installation guide and/or the technical sheet, inappropriate or excessive tightening, misuse and/or abuse, failure to comply with the maintenance guidelines, normal wear, contamination and/or corrosion, neglect/accident, unauthorized repair attempt and/or disassembly, alteration of the product, assembly with incompatible products.
If the product contains one or several parts with a 1-month limited warranty (GL), these parts will be excluded from the 1-year warranty (G1).
Disclaimer
Please note that while we make every effort to accurately represent our products on our website, slight variations in design and appearance may occur due to factors such as manufacturing processes and materials used.