• Solenoid certified ATEX II, cat. 2G Ex mb IIC T5, T4 Gb & 2D Ex mb tb IIIC T95C, T130C Db IP65
• Suitable for use in zones 1, 2, 21 and 22 and in non-restricted zones
• Cv: 3.61
• Port size: 1/2 (F) NPT
• 3 Ways / 2 Positions
• Type: Normally Closed
• Voltage : 110 VAC
• Manual Override: Push-Button
• Voltage Fluctuation: ±10%
• Response Time: = 25 ms
• Maximum Cycles/Minute: 300
• Working Pressure: 22 to 145 PSI
• Working Temperature: 5 to 60 °C
Material(s):
• Body, End Caps, and Manifold: Anodized Aluminum
• Seals: Oil resistant Rubber lip gaskets
• Spool: Aluminum
• Other Internal Parts: Stainless Steel, Brass, Aluminum
• Solenoid manual override button shifts the valve without electrical power
• Standard connector (DIN type)
• Electrical coil can be turned 360° in 90° increments to accommodate most installation requirements
• OPTIMA air control valves offer high flow performance and reliability
• Compact size
• High flow
• Quick response
• Highly reliable spool technology
• 3 WAYS, 2 positions
• Designed for in-line or bar manifolding
HOW IT WORKS
A “maintained” electrical signal shifts the single solenoid valve
When the signal is removed, the valve returns to its normal position
These valves can be used to provide pilot signals for larger valves
• Solenoid certified ATEX II, cat. 2G Ex mb IIC T5, T4 Gb & 2D Ex mb tb IIIC T95C, T130C Db IP65
• Suitable for use in zones 1, 2, 21 and 22 and in non-restricted zones
• Cv: 3.61
• Port size: 1/2 (F) NPT
• 3 Ways / 2 Positions
• Type: Normally Closed
• Voltage : 110 VAC
• Manual Override: Push-Button
• Voltage Fluctuation: ±10%
• Response Time: = 25 ms
• Maximum Cycles/Minute: 300
• Working Pressure: 22 to 145 PSI
• Working Temperature: 5 to 60 °C
Material(s):
• Body, End Caps, and Manifold: Anodized Aluminum
• Seals: Oil resistant Rubber lip gaskets
• Spool: Aluminum
• Other Internal Parts: Stainless Steel, Brass, Aluminum
• Solenoid manual override button shifts the valve without electrical power
• Standard connector (DIN type)
• Electrical coil can be turned 360° in 90° increments to accommodate most installation requirements
• OPTIMA air control valves offer high flow performance and reliability
• Compact size
• High flow
• Quick response
• Highly reliable spool technology
• 3 WAYS, 2 positions
• Designed for in-line or bar manifolding
HOW IT WORKS
A “maintained” electrical signal shifts the single solenoid valve
When the signal is removed, the valve returns to its normal position
These valves can be used to provide pilot signals for larger valves