• Inlet(s): 1/4 O.D. NPT
• Outlet: 3/8 O.D. NPT
• Maximum Flow*: 60 SCFM
* Choice based on a compressor using mineral or synthetic oil with an oil residue adsorption capacity of 5 mg/m3 or less
• Maximum Flow**: 30 SCFM
** Choice based on a compressor using polyglycol
• Dimensions: A) 22.86 cm x B) 12.70 cm x C) 12.70 cm
• Weight: 1.3 kg
• Wall mounting bracket: included
• Replacement media kit: --
• Inlet condensate temperature range: 1.7 to 43 °C
• Maximum condensat inlet pressure: 232 PSI
• Maximum oil carry over: < 20 ppm
• Expected duration of the filter element:
8 000 hrs at 30 SCFM
5 000 hrs at 60 SCFM
Material(s):
• Polyethylene
• Highest performance and low operating cost
• Reliable, lightweight, clean, dust-free
• Easy to handle, install and remove
• No pre-soaking required saving installation and maintenance costs
• High quality single piece molded body
• Multiple inlet connections for multiple purge points
• TOPRING water/oil separators efficiently treat oils and other condensate contaminants from the compressed air system for safe and legal disposal in the drain
• They separate any type of condensate discharged from a drain and reduce condensate disposal costs
• It is easy to select a water/oil separator model based on the applications airflow requirements ( SCFM)
• With an advanced polypropylene filter, it can separate any type of condensate containing any type of compressor lubricant discharged from any type of drain, without the need for a settling or storage tank
• A cost effective and reliable solution that meet environmental regulations for condensate disposal
HOW IT WORKS
As the condensate passes through the primary filter, it is depressurized. The solid particles are then trapped, protecting the secondary filter and catching bulk hydrocarbons in a high capacity oil absorber. The condensate then passes through the filtration media which absorbs oil (concentrations of 5 ppm or less).
INSTALLATION TIP
Please refer to Series 47 to see the aluminum manifold bars required for water/oil separator installation
Perfect for installations with:
• Portable applications for restricted floor space
• Any type of oil compressor
• Emulsified mixtures
• Any type of drain
• EPA landfill regulations
• Low cost operations
• Inlet(s): 1/4 O.D. NPT
• Outlet: 3/8 O.D. NPT
• Maximum Flow*: 60 SCFM
* Choice based on a compressor using mineral or synthetic oil with an oil residue adsorption capacity of 5 mg/m3 or less
• Maximum Flow**: 30 SCFM
** Choice based on a compressor using polyglycol
• Dimensions: A) 22.86 cm x B) 12.70 cm x C) 12.70 cm
• Weight: 1.3 kg
• Wall mounting bracket: included
• Replacement media kit: --
• Inlet condensate temperature range: 1.7 to 43 °C
• Maximum condensat inlet pressure: 232 PSI
• Maximum oil carry over: < 20 ppm
• Expected duration of the filter element:
8 000 hrs at 30 SCFM
5 000 hrs at 60 SCFM
Material(s):
• Polyethylene
• Highest performance and low operating cost
• Reliable, lightweight, clean, dust-free
• Easy to handle, install and remove
• No pre-soaking required saving installation and maintenance costs
• High quality single piece molded body
• Multiple inlet connections for multiple purge points
• TOPRING water/oil separators efficiently treat oils and other condensate contaminants from the compressed air system for safe and legal disposal in the drain
• They separate any type of condensate discharged from a drain and reduce condensate disposal costs
• It is easy to select a water/oil separator model based on the applications airflow requirements ( SCFM)
• With an advanced polypropylene filter, it can separate any type of condensate containing any type of compressor lubricant discharged from any type of drain, without the need for a settling or storage tank
• A cost effective and reliable solution that meet environmental regulations for condensate disposal
HOW IT WORKS
As the condensate passes through the primary filter, it is depressurized. The solid particles are then trapped, protecting the secondary filter and catching bulk hydrocarbons in a high capacity oil absorber. The condensate then passes through the filtration media which absorbs oil (concentrations of 5 ppm or less).
INSTALLATION TIP
Please refer to Series 47 to see the aluminum manifold bars required for water/oil separator installation
Perfect for installations with:
• Portable applications for restricted floor space
• Any type of oil compressor
• Emulsified mixtures
• Any type of drain
• EPA landfill regulations
• Low cost operations
