• Inlet: 1/2 (M) NPT
• Outlet: 1/2 (F) NPT
• Maximum Working Pressure: 290 PSI
• Working Pressure: 0-230 PSI
• Working Temperature: -1 to 80 °C
• Bowl Capacity: 400 ml
• Height: 146 Mm
• Depth: 135 mm
Material(s):
• Body: Aluminum
• Union and drain COCK: Brass
• Seal: NBR
• The condensate is collected in a storage tank. A float opens a valve when a certain level of condensate is reached. The condensate flows through the outlet of the drain automatically
• It is possible to install a hose to direct the flow of condensate to a specific location
• Energy saver – no electricity required
• Economical
• Low maintenance
INSTALLATION TIP
It is strongly recommended to always install a “ Y ? strainer (59.705) ahead of an external drain. By trapping large debris and sludge, this will prevent costly malfunctions and extend the life of the automatic drain.
• Can be used where liquids tend to accumulate on a compressed air line system such as a drop leg
• Inlet: 1/2 (M) NPT
• Outlet: 1/2 (F) NPT
• Maximum Working Pressure: 290 PSI
• Working Pressure: 0-230 PSI
• Working Temperature: -1 to 80 °C
• Bowl Capacity: 400 ml
• Height: 146 Mm
• Depth: 135 mm
Material(s):
• Body: Aluminum
• Union and drain COCK: Brass
• Seal: NBR
• The condensate is collected in a storage tank. A float opens a valve when a certain level of condensate is reached. The condensate flows through the outlet of the drain automatically
• It is possible to install a hose to direct the flow of condensate to a specific location
• Energy saver – no electricity required
• Economical
• Low maintenance
INSTALLATION TIP
It is strongly recommended to always install a “ Y ? strainer (59.705) ahead of an external drain. By trapping large debris and sludge, this will prevent costly malfunctions and extend the life of the automatic drain.
• Can be used where liquids tend to accumulate on a compressed air line system such as a drop leg