• Preset Pressure: 45 PSI +/- 4.35 PSI
• Inlet(F): 1/2 NPT
• Outlet(M): 1/2 NPT
• Airflow: 49 SCFM
• Maximum inlet pressure: 365 PSI
• Working Temperature: 0 to 80 °C
Material(s):
• Body: Aluminum
• Spring: Stainless steel
• Valve: Brass
• Seal: Nitrile
• Vents residual pressure to avoid accidental tool activation after disconnection
• Supplies a constant, exact and preset outlet pressure regardless of the inlet pressure
• Economical solution to set ideal pressure at the tool, resulting in energy and cost savings
• Prevents compressed air waste
• Highly reliable
• locked to prevent pressure change, tamperproof
• Increases tool service life
• Anticorrosion
• Lightweight and compact design
INSTALLATION TIP
The ToolReg® preset regulators must be mounted directly on the air tool in order to ensure correct pressure, so that possible pressure drops in air hoses, do not influence the pressure at the tool
The residual pressure in the tool is relieved when it is removed from the compressed air supply line, preventing unintentional activation of the tool with disastrous consequences
The ToolReg® preset regulators are an economical method to achieve the ideal pressure at the tool
ToolReg® regulator allows automatic removal of the residual pressure of the tool when disconnected to eliminate any risk of unintentional activation of the tool
• General use with air tools and especially with nailers
• Preset Pressure: 45 PSI +/- 4.35 PSI
• Inlet(F): 1/2 NPT
• Outlet(M): 1/2 NPT
• Airflow: 49 SCFM
• Maximum inlet pressure: 365 PSI
• Working Temperature: 0 to 80 °C
Material(s):
• Body: Aluminum
• Spring: Stainless steel
• Valve: Brass
• Seal: Nitrile
• Vents residual pressure to avoid accidental tool activation after disconnection
• Supplies a constant, exact and preset outlet pressure regardless of the inlet pressure
• Economical solution to set ideal pressure at the tool, resulting in energy and cost savings
• Prevents compressed air waste
• Highly reliable
• locked to prevent pressure change, tamperproof
• Increases tool service life
• Anticorrosion
• Lightweight and compact design
INSTALLATION TIP
The ToolReg® preset regulators must be mounted directly on the air tool in order to ensure correct pressure, so that possible pressure drops in air hoses, do not influence the pressure at the tool
The residual pressure in the tool is relieved when it is removed from the compressed air supply line, preventing unintentional activation of the tool with disastrous consequences
The ToolReg® preset regulators are an economical method to achieve the ideal pressure at the tool
ToolReg® regulator allows automatic removal of the residual pressure of the tool when disconnected to eliminate any risk of unintentional activation of the tool
• General use with air tools and especially with nailers