• Replacement nozzle
• Noise Level at 87 PSI: 84 dB
• Air Consumption at 87 PSI: 10.2 SCFM
• Maximum Working Pressure: 232 PSI
• Maximum Output Thrust at 116 PSI: 0.88 lbf
• Working Temperature: -10 to 80 °C
• Connection: 1/4 (F) NPT
Material(s):
• Body: Acetal plastic (POM)
• Nozzle: Plated steel/stainless steel/Aluminum
• Valve: Acetal plastic (POM)
• Springs: Stainless steel
• Seals: Nitrile rubber
• Allows cleaning of cylindrical objects or hard-to-reach places
• Nozzle offers 90° angle airflow
• The push-to-connect nozzle fits easily on AIRPRO blow guns (8 mm tubes)
HOW IT WORKS: 90° ANGLE NOZZLE
Nozzle offers 90° angle airflow
If the nozzle is blocked, the airflow escapes through the holes and the static pressure remains below 30 PSI
The blow gun is safe only when the 90° angle is used
• Users should never use blow guns to clean themselves
• A vacuum or a safety cleaning unit should be used instead
• Clearing away chips and shavings, cleaning of parts and machines, blowing, drying and dust removal from parts and work areas
• For machine and woodworking shops, construction, lumber mills, paper mills, textile mills, foundries, transportation, bakeries and food processing, rubber and plastic manufacturing plants, general cleanup and maintenance
• Replacement nozzle
• Noise Level at 87 PSI: 84 dB
• Air Consumption at 87 PSI: 10.2 SCFM
• Maximum Working Pressure: 232 PSI
• Maximum Output Thrust at 116 PSI: 0.88 lbf
• Working Temperature: -10 to 80 °C
• Connection: 1/4 (F) NPT
Material(s):
• Body: Acetal plastic (POM)
• Nozzle: Plated steel/stainless steel/Aluminum
• Valve: Acetal plastic (POM)
• Springs: Stainless steel
• Seals: Nitrile rubber
• Allows cleaning of cylindrical objects or hard-to-reach places
• Nozzle offers 90° angle airflow
• The push-to-connect nozzle fits easily on AIRPRO blow guns (8 mm tubes)
HOW IT WORKS: 90° ANGLE NOZZLE
Nozzle offers 90° angle airflow
If the nozzle is blocked, the airflow escapes through the holes and the static pressure remains below 30 PSI
The blow gun is safe only when the 90° angle is used
• Users should never use blow guns to clean themselves
• A vacuum or a safety cleaning unit should be used instead
• Clearing away chips and shavings, cleaning of parts and machines, blowing, drying and dust removal from parts and work areas
• For machine and woodworking shops, construction, lumber mills, paper mills, textile mills, foundries, transportation, bakeries and food processing, rubber and plastic manufacturing plants, general cleanup and maintenance