• Maximum Output Thrust: 0.9 lb
• Noise Level: 101 dB
• Air Consumption: 13 SCFM
• Maximum Operating Pressure: 120 PSI
• Temperature Range: -40 to 65 °C
• Connection: 1/4 (F) NPT
Material(s):
• Body: Aluminum
• Nozzle: Brass
• Designed to move large volumes of debris using standard shop pressures
• Ergonomically designed to reduce hand fatigue and help minimize carpal tunnel syndrome
• Unique patented design, safe and trouble-free
• Lightweight, rugged, cast Aluminum body with rubber over-moulded trigger
• Venturi tip increases thrust and limits static pressure to less than 30 PSI when blocked
HOW IT WORKS: VENTURI NOZZLE
Airflow speeds up as it passes through the nozzle, drawing in ambient air through two side ports. Increased velocity and volume of air exiting the nozzle boosts available air thrust
Should the tip of the nozzle be blocked, the entire airflow will be diverted through the slots so the static pressure remains under 30 PSI (meets OSHA standards)
• Users should never use blow guns to clean themselves
• A vacuum or a safety cleaning unit should be used instead
• Clearing away chips and shavings, cleaning of parts and machines, blowing, drying and dust removal from parts and work areas and general clean-up and maintenance
Long tubes for blowing floor debris into piles, cleaning masonry forms, tanks, ovens, large molds, as well as machinery and storage areas
• Maximum Output Thrust: 0.9 lb
• Noise Level: 101 dB
• Air Consumption: 13 SCFM
• Maximum Operating Pressure: 120 PSI
• Temperature Range: -40 to 65 °C
• Connection: 1/4 (F) NPT
Material(s):
• Body: Aluminum
• Nozzle: Brass
• Designed to move large volumes of debris using standard shop pressures
• Ergonomically designed to reduce hand fatigue and help minimize carpal tunnel syndrome
• Unique patented design, safe and trouble-free
• Lightweight, rugged, cast Aluminum body with rubber over-moulded trigger
• Venturi tip increases thrust and limits static pressure to less than 30 PSI when blocked
HOW IT WORKS: VENTURI NOZZLE
Airflow speeds up as it passes through the nozzle, drawing in ambient air through two side ports. Increased velocity and volume of air exiting the nozzle boosts available air thrust
Should the tip of the nozzle be blocked, the entire airflow will be diverted through the slots so the static pressure remains under 30 PSI (meets OSHA standards)
• Users should never use blow guns to clean themselves
• A vacuum or a safety cleaning unit should be used instead
• Clearing away chips and shavings, cleaning of parts and machines, blowing, drying and dust removal from parts and work areas and general clean-up and maintenance
Long tubes for blowing floor debris into piles, cleaning masonry forms, tanks, ovens, large molds, as well as machinery and storage areas