• Adjustable air amplifier for flexible air hose or flexible pneumatic tubing installation
• Air Inlet(F): 1/8 NPT
• Throat Diameter: 0.38 in
• Amplification Ratio: 4: 1
• Output at 80 PSI: 60 SCFM
• Air consumption: 15 SCFM
• Thread: 1/8 (F) NPT
• Maximum Working Pressure: 250 PSI
Material(s):
• Solid brass
• Amplifies compressed airflow 4 times, delivering high thrust with a fraction of the air used by open air lines
• Meets OSHA and other Health and Safety Agencies’ noise and dead-end pressure requirements
• No electricity or explosion hazards
• In-line model (68.140) ideal for retrofitting open air lines blow off applications where system set-up does not change frequently. Can also air convey fine granular products with a 3/4 in diameter inlet for attachment of tubing
• Safe and quiet
• Easy-to-control flow/force
• No moving parts ensuring maintenance-free operation
• Instant ON/OFF
HOW IT WORKS
It is a simple, lightweight and economical tool that uses the energy of a small volume of compressed air to produce a high volume. High-speed, low-pressure airflow
• For parts ejection from molding machines and stamping presses
• Blowing off chips, trim scrap
• Air conveying dusts, powders and fibers
• Parts cleaning
• Cooling
• Fume and vapor removal
• Adjustable air amplifier for flexible air hose or flexible pneumatic tubing installation
• Air Inlet(F): 1/8 NPT
• Throat Diameter: 0.38 in
• Amplification Ratio: 4: 1
• Output at 80 PSI: 60 SCFM
• Air consumption: 15 SCFM
• Thread: 1/8 (F) NPT
• Maximum Working Pressure: 250 PSI
Material(s):
• Solid brass
• Amplifies compressed airflow 4 times, delivering high thrust with a fraction of the air used by open air lines
• Meets OSHA and other Health and Safety Agencies’ noise and dead-end pressure requirements
• No electricity or explosion hazards
• In-line model (68.140) ideal for retrofitting open air lines blow off applications where system set-up does not change frequently. Can also air convey fine granular products with a 3/4 in diameter inlet for attachment of tubing
• Safe and quiet
• Easy-to-control flow/force
• No moving parts ensuring maintenance-free operation
• Instant ON/OFF
HOW IT WORKS
It is a simple, lightweight and economical tool that uses the energy of a small volume of compressed air to produce a high volume. High-speed, low-pressure airflow
• For parts ejection from molding machines and stamping presses
• Blowing off chips, trim scrap
• Air conveying dusts, powders and fibers
• Parts cleaning
• Cooling
• Fume and vapor removal
