• Port Size: 3/4 (F) NPT
• Maximum Airflow at 100 PSI: 105 SCFM
• Maximum Working Pressure: 150 PSI
• Pressure Range: Standard: 5-125 PSI
• Options: 5-30 PSI • 5-60 PSI
• Working Temperature: 5 to 60 °C
• Filtration: 5 microns
• Drain: Automatic drain
• Bowl Capacity: Filter/regulator: 45 ml, Lubricator: 130 ml
• Pressure Gauge Port Size: 1/4 (F) NPT
Material(s):
• Body Material(s): Die cast Aluminum
• Bowl Type: Die cast Aluminum
• Bowl Guard: Steel
• Regulation Type: Relieving
• Filter Element: Polyethylene, 5 microns
• Deflector & Spinner: ABS
• O-Rings & Seals: EPDM rubber
• Regulator Cap: Die cast Aluminum
• Regulator Adjusting Knob: Reinforced nylon
• Diaphragm: EPDM rubber
• Poppet Valve: Brass and rubber
• Regulator Spring: Stainless steel
• Lubricator Sight Gauge: Polycarbonate
• Fill Plug: ABS
• Retainer: ABS
• Lubricator Adjusting Knob: ABS
• Check Flap: Polyurethane
• Compact design with space saving integrated F/R
• Accurate pressure control with little drift
• Removable locking push-pull adjusting knob
• Lubrication proportioned to airflow
• Pressure gauge and mounting bracket included
WHERE TO INSTALL A FILTER
Install the filter as far as possible from the compressor to allow the compressed air to cool and water vapors to condense. Removal of water in liquid form is more effective than removing water which is vapor form.
Install the filter closest to the tool and before the lubricator and regulator
Always install the filter with the arrows pointing to the tool or application
WHERE TO INSTALL A REGULATOR
Install the regulator on each pipe where applications and air tools requires different working pressure
Always install the regulator downstream of a filter and upstream of a lubricator
Can be installed vertically or horizontally
Always install regulator with the arrows pointing to the tool or application
WHERE TO INSTALL A LUBRICATOR
Install as close to the tool as possible, within 5 meters or 30 meters for micro-fog type lubricators
Always install downstream of a filter and a regulator
Ensure that the lubricator is easily accessible for filling pneumatic tool oil
Always install with the arrows pointing to the tool or application
Diaphragm + Piston for 450 F/R
Alu Bowl w/AutoD for 400-450-500-600 F,FC,F/R
Alu Bowl for 400-450-500-600 L
Rod for Element 400-450 F/R Auto Poly
Element 5 mic for 400-450 F/R Auto
Oil Fill Plug for L 400-450-500
5-125 PSI Spring for 400-450 R, F/R
Sight Dome for 300-400-450-500 L
Cap Knob for R, F/R 400-450-500
Mounting Nut for R, F/R 400-450-500
• Port Size: 3/4 (F) NPT
• Maximum Airflow at 100 PSI: 105 SCFM
• Maximum Working Pressure: 150 PSI
• Pressure Range: Standard: 5-125 PSI
• Options: 5-30 PSI • 5-60 PSI
• Working Temperature: 5 to 60 °C
• Filtration: 5 microns
• Drain: Automatic drain
• Bowl Capacity: Filter/regulator: 45 ml, Lubricator: 130 ml
• Pressure Gauge Port Size: 1/4 (F) NPT
Material(s):
• Body Material(s): Die cast Aluminum
• Bowl Type: Die cast Aluminum
• Bowl Guard: Steel
• Regulation Type: Relieving
• Filter Element: Polyethylene, 5 microns
• Deflector & Spinner: ABS
• O-Rings & Seals: EPDM rubber
• Regulator Cap: Die cast Aluminum
• Regulator Adjusting Knob: Reinforced nylon
• Diaphragm: EPDM rubber
• Poppet Valve: Brass and rubber
• Regulator Spring: Stainless steel
• Lubricator Sight Gauge: Polycarbonate
• Fill Plug: ABS
• Retainer: ABS
• Lubricator Adjusting Knob: ABS
• Check Flap: Polyurethane
• Compact design with space saving integrated F/R
• Accurate pressure control with little drift
• Removable locking push-pull adjusting knob
• Lubrication proportioned to airflow
• Pressure gauge and mounting bracket included
WHERE TO INSTALL A FILTER
Install the filter as far as possible from the compressor to allow the compressed air to cool and water vapors to condense. Removal of water in liquid form is more effective than removing water which is vapor form.
Install the filter closest to the tool and before the lubricator and regulator
Always install the filter with the arrows pointing to the tool or application
WHERE TO INSTALL A REGULATOR
Install the regulator on each pipe where applications and air tools requires different working pressure
Always install the regulator downstream of a filter and upstream of a lubricator
Can be installed vertically or horizontally
Always install regulator with the arrows pointing to the tool or application
WHERE TO INSTALL A LUBRICATOR
Install as close to the tool as possible, within 5 meters or 30 meters for micro-fog type lubricators
Always install downstream of a filter and a regulator
Ensure that the lubricator is easily accessible for filling pneumatic tool oil
Always install with the arrows pointing to the tool or application