• Port Size: 1/2 (F) NPT
• Maximum Airflow at 100 PSI: 84 SCFM
• Maximum Working Pressure: 150 PSI
• Working Temperature: 5 to 60 °C
• Filtration: 0.01 micron
• Drain: Automatic drain
• Bowl Capacity: 45 ml
Material(s):
• Body Material(s): Die cast Aluminum
• Bowl Type: Polycarbonate with steel guard
• Bowl Guard: Steel
• Regulation Type: Relieving
• Filter Element: Coalescing filter, Borosilicate, 0.01 micron
• Deflector & Spinner: ABS
• O-Rings & Seals: EPDM rubber
• Compact size
• High performance filter that removes solid particles and oil and water aerosols greater than 0.01 micron, of which 99.97 % of those between 0.3 and 0.6 Micron
• Standard semi-automatic drain requires a simple tug of the ring to drain
• Mounting bracket included
WHERE TO INSTALL A FILTER
Install the filter as far as possible from the compressor to allow the compressed air to cool and water vapors to condense. Removal of water in liquid form is more effective than removing water which is vapor form.
Install the filter closest to the tool and before the lubricator and regulator
Always install the filter with the arrows pointing to the tool or application
• Port Size: 1/2 (F) NPT
• Maximum Airflow at 100 PSI: 84 SCFM
• Maximum Working Pressure: 150 PSI
• Working Temperature: 5 to 60 °C
• Filtration: 0.01 micron
• Drain: Automatic drain
• Bowl Capacity: 45 ml
Material(s):
• Body Material(s): Die cast Aluminum
• Bowl Type: Polycarbonate with steel guard
• Bowl Guard: Steel
• Regulation Type: Relieving
• Filter Element: Coalescing filter, Borosilicate, 0.01 micron
• Deflector & Spinner: ABS
• O-Rings & Seals: EPDM rubber
• Compact size
• High performance filter that removes solid particles and oil and water aerosols greater than 0.01 micron, of which 99.97 % of those between 0.3 and 0.6 Micron
• Standard semi-automatic drain requires a simple tug of the ring to drain
• Mounting bracket included
WHERE TO INSTALL A FILTER
Install the filter as far as possible from the compressor to allow the compressed air to cool and water vapors to condense. Removal of water in liquid form is more effective than removing water which is vapor form.
Install the filter closest to the tool and before the lubricator and regulator
Always install the filter with the arrows pointing to the tool or application