• Port Size: 1/2 (F) NPT
• Maximum Airflow at 100 PSI: 141 SCFM
• Maximum Working Pressure: 150 PSI
• Pressure Range: Standard: 5-125 PSI
• Options: 5-30 PSI • 5-60 PSI
• Working Temperature: 5 to 60 °C
• Filtration: 5 microns
• Drain: Automatic drain
• Bowl Capacity: Filter: 45 ml, Lubricator: 130 ml
• Pressure Gauge Port Size: 1/4 (F) NPT
Material(s):
• Body Material(s): Die cast Aluminum
• Bowl Type: Polycarbonate with steel guard
• Bowl Guard: Steel
• Easy removal of individual units
• Accurate pressure control with little drift
• Removable locking push-pull adjusting knob
• Standard semi-automatic drain requires a simple tug of the ring to drain
• Coalescing high performance filter that eliminates all solid particles superior to 0.01 micron and 99.99 % of water and oil aerosols
• Includes venting safety lockout valve for closing flow to or from AIRFLO F+Fc+R
• Shut off valve with 3 ports and 2 positions relieves downstream pressure when closed and can be locked in closed position.
• Pressure gauge, piping adapters and mounting brackets included
WHERE TO INSTALL A FILTER
Install the filter as far as possible from the compressor to allow the compressed air to cool and water vapors to condense. Removal of water in liquid form is more effective than removing water which is vapor form.
Install the filter closest to the tool and before the lubricator and regulator
Always install the filter with the arrows pointing to the tool or application
WHERE TO INSTALL A REGULATOR
Install the regulator on each pipe where applications and air tools requires different working pressure
Always install the regulator downstream of a filter and upstream of a lubricator
Can be installed vertically or horizontally
Always install regulator with the arrows pointing to the tool or application
WHERE TO INSTALL A LUBRICATOR
Install as close to the tool as possible, within 5 meters or 30 meters for micro-fog type lubricators
Always install downstream of a filter and a regulator
Ensure that the lubricator is easily accessible for filling pneumatic tool oil
Always install with the arrows pointing to the tool or application
Rod for Element 400-450 F Auto Poly
Element 5 mic for 400-450 F Auto
Poly Bowl w/Guard & AutoD 400-450-500 F,FC,F/R
Poly Bowl w/Guard for 400-450-500 L
5-125 PSI Spring for 400-450 R, F/R
Oil Fill Plug for L 400-450-500
Cap Knob for R, F/R 400-450-500
Mounting Nut for R, F/R 400-450-500
Diaphragm + Piston for 400 R
Sight Dome for 300-400-450-500 L
• Port Size: 1/2 (F) NPT
• Maximum Airflow at 100 PSI: 141 SCFM
• Maximum Working Pressure: 150 PSI
• Pressure Range: Standard: 5-125 PSI
• Options: 5-30 PSI • 5-60 PSI
• Working Temperature: 5 to 60 °C
• Filtration: 5 microns
• Drain: Automatic drain
• Bowl Capacity: Filter: 45 ml, Lubricator: 130 ml
• Pressure Gauge Port Size: 1/4 (F) NPT
Material(s):
• Body Material(s): Die cast Aluminum
• Bowl Type: Polycarbonate with steel guard
• Bowl Guard: Steel
• Easy removal of individual units
• Accurate pressure control with little drift
• Removable locking push-pull adjusting knob
• Standard semi-automatic drain requires a simple tug of the ring to drain
• Coalescing high performance filter that eliminates all solid particles superior to 0.01 micron and 99.99 % of water and oil aerosols
• Includes venting safety lockout valve for closing flow to or from AIRFLO F+Fc+R
• Shut off valve with 3 ports and 2 positions relieves downstream pressure when closed and can be locked in closed position.
• Pressure gauge, piping adapters and mounting brackets included
WHERE TO INSTALL A FILTER
Install the filter as far as possible from the compressor to allow the compressed air to cool and water vapors to condense. Removal of water in liquid form is more effective than removing water which is vapor form.
Install the filter closest to the tool and before the lubricator and regulator
Always install the filter with the arrows pointing to the tool or application
WHERE TO INSTALL A REGULATOR
Install the regulator on each pipe where applications and air tools requires different working pressure
Always install the regulator downstream of a filter and upstream of a lubricator
Can be installed vertically or horizontally
Always install regulator with the arrows pointing to the tool or application
WHERE TO INSTALL A LUBRICATOR
Install as close to the tool as possible, within 5 meters or 30 meters for micro-fog type lubricators
Always install downstream of a filter and a regulator
Ensure that the lubricator is easily accessible for filling pneumatic tool oil
Always install with the arrows pointing to the tool or application