• Port Size: 1/4 (F) NPT
• Maximum Airflow at 100 PSI: 28 SCFM
• Maximum Working Pressure: 150 PSI
• Pressure Range: 5-125 PSI
• Working Temperature: 5 to 60°C
• Filtration: 5 micron filter – 0.3 micron coalescing filter
Drain
• Standard Bowl: Automatic • 1/8 (M) NPT
• Bowl Capacity: 20 ml filter/regulator – 45 ml coalescing filter
• Pressure Gauge Port Size: 1/8 (F) NPT
Materials
• Body Material: Die cast aluminum
• Bowl Type: Polycarbonate with steel guard
• Bowl Guard: Steel
• Regulation Type: Relieving
• Filter Element: filter: Polyethylene, 5 micron |coalescing filter: Fiberglass paper, 0.3 micron
• Deflector & Spinner: ABS
• O-Rings & Seals: EPDM rubber
• Regulator Cap: Reinforced nylon
• Regulator Adjusting Knob: Reinforced nylon
• Diaphragm: EPDM rubber
• Poppet Valve: Brass and rubber
• Regulator Spring: Stainless steel
• Lubricator Sight Gauge: Polycarbonate
• Fill Plug: ABS
• Retainer: ABS
• Lubricator Adjusting Knob: ABS
• Check Flap: Polyurethane
• Compact design with space saving integrated filter/regulator
• Accurate pressure control with little drift
• Removable locking push-pull adjusting knob
• High performance filter that removes 99.97% of solid particles, oil and water aerosols greater than 0.3 micron
• Pressure gauge, piping adapters and mounting bracket included
WHERE TO INSTALL A FILTER
Install the filter as far as possible from the compressor to allow the compressed air to cool and water vapors to condense. Removal of water in liquid form is more effective than removing water which is vapor form.
Install the filter closest to the tool and before the lubricator and regulator.
Always install the filter with the arrows pointing to the tool or application.
WHERE TO INSTALL A REGULATOR
Install the regulator on each pipe where applications and air tools requires different working pressure.
Always install the regulator downstream of a filter and upstream of a lubricator.
Can be installed vertically or horizontally.
Always install regulator with the arrows pointing to the tool or application.
• Port Size: 1/4 (F) NPT
• Maximum Airflow at 100 PSI: 28 SCFM
• Maximum Working Pressure: 150 PSI
• Pressure Range: 5-125 PSI
• Working Temperature: 5 to 60°C
• Filtration: 5 micron filter – 0.3 micron coalescing filter
Drain
• Standard Bowl: Automatic • 1/8 (M) NPT
• Bowl Capacity: 20 ml filter/regulator – 45 ml coalescing filter
• Pressure Gauge Port Size: 1/8 (F) NPT
Materials
• Body Material: Die cast aluminum
• Bowl Type: Polycarbonate with steel guard
• Bowl Guard: Steel
• Regulation Type: Relieving
• Filter Element: filter: Polyethylene, 5 micron |coalescing filter: Fiberglass paper, 0.3 micron
• Deflector & Spinner: ABS
• O-Rings & Seals: EPDM rubber
• Regulator Cap: Reinforced nylon
• Regulator Adjusting Knob: Reinforced nylon
• Diaphragm: EPDM rubber
• Poppet Valve: Brass and rubber
• Regulator Spring: Stainless steel
• Lubricator Sight Gauge: Polycarbonate
• Fill Plug: ABS
• Retainer: ABS
• Lubricator Adjusting Knob: ABS
• Check Flap: Polyurethane
• Compact design with space saving integrated filter/regulator
• Accurate pressure control with little drift
• Removable locking push-pull adjusting knob
• High performance filter that removes 99.97% of solid particles, oil and water aerosols greater than 0.3 micron
• Pressure gauge, piping adapters and mounting bracket included
WHERE TO INSTALL A FILTER
Install the filter as far as possible from the compressor to allow the compressed air to cool and water vapors to condense. Removal of water in liquid form is more effective than removing water which is vapor form.
Install the filter closest to the tool and before the lubricator and regulator.
Always install the filter with the arrows pointing to the tool or application.
WHERE TO INSTALL A REGULATOR
Install the regulator on each pipe where applications and air tools requires different working pressure.
Always install the regulator downstream of a filter and upstream of a lubricator.
Can be installed vertically or horizontally.
Always install regulator with the arrows pointing to the tool or application.